Zd10-100 Datasheet Jun 2026

Connect the other side to an Analog Pin of a microcontroller. Connect the same Analog Pin to a fixed resistor (e.g., ) leading to Ground (GND).

The following table consolidates the most reliable data from the manufacturer’s official revision 2.2 datasheet and verified third‑party sources.

Intelligent breathing belts, pressure-sensitive clothing, and posture monitors. zd10-100 datasheet

Note: Always verify the specific manufacturer’s datasheet, as "ZD10-100" could be a generic series code. We will analyze the most common interpretation.

Based on technical documentation from manufacturers and retailers like Flexniss and Probots , the ZD10-100 features these key benchmarks: 0 to 500g. Connect the other side to an Analog Pin of a microcontroller

Responds to forces as low as < 20g.

A5: Exceeding the rated range can cause permanent damage, such as crushing the conductive polymer layer or delaminating the film. The datasheet explicitly warns against over‑loading. To measure the pressure

To measure the pressure, you need to convert the resistance changes into voltage changes using a voltage divider circuit. of the ZD10-100 to VCC (e.g., 3.3V).