Xprinter Xp-420b Wifi - Setup

The printer does not have a screen, so you must "push" the WiFi settings to it through a computer. Xprinter-dv.ru Download Software Diagnostic Tool (often version V1.027b or later) from the Xprinter official site or a verified distributor. Verify Connection : Open the tool and select as the interface. Click Get Status ; if the indicator turns green, the connection is active. Set WiFi Parameters button in the tool. to find available networks and select your SSID. Enter your WiFi password and click Confirm IP

The Xprinter Diagnostic Tool (for Windows) and the official BarTender/Xprinter drivers. Step 1: Connect via USB for Initial Configuration

Click on to open the wireless configuration window. xprinter xp-420b wifi setup

Once connected, click Get to see the assigned IP address (e.g., 192.168.1.110 ). For a more stable connection, it is recommended to set a Static IP in the tool so the address doesn't change later.

Plug the power cord into the Xprinter XP-420B and turn the power switch . The printer does not have a screen, so

To her delight, the printer's WiFi indicator light turned solid blue, indicating a successful connection. She printed a test page from her computer, and to her relief, it spooled out of the printer without a hitch.

You can set up the XP-420B Wi-Fi using two primary methods: (connecting it to your router) or Wi-Fi Direct Mode (connecting your phone directly to the printer's own signal). Method 1: Connecting to Your Network (PC Setup) Click Get Status ; if the indicator turns

Release the feed button immediately after the printer beeps or the indicator light flashes.

Enter the printer's manually if the app does not auto-detect it.

Open a web browser, type the printer's default IP address into the address bar, and press Enter.

Check the line. If it shows a valid IP address assigned by your router (and not 0.0.0.0 ), the Wi-Fi setup was successful. Note this IP address down. Step 5: Install Driver and Add Network Printer