Open Device Manager, right-click your USB controller/port, select Properties , go to the Power Management tab, and uncheck Allow the computer to turn off this device to save power . Hardware ID Missing / USB Device Not Recognized
Click the button and point the installer to the Driver folder located in Step 2. Ensure the checkbox for Include subfolders is marked.
If you hit any snags during setup, tell me you are using and the exact model number of your Xinje PLC so I can provide specific troubleshooting steps. Share public link xinje plc usb driver install
Unplug the USB cable, uninstall the driver by right-clicking it in Device Manager, restart your PC, and follow Method 3 to reinstall.
Upon reboot, press or F7 to select Disable driver signature enforcement . Re-attempt the manual driver installation. 2. PLC Disconnects Randomly If you hit any snags during setup, tell
However, a failed "XINJE PLC USB driver install" can halt debugging, delay commissioning, and cause hours of unnecessary troubleshooting. Windows might throw a "Driver not found" error, or worse, the XINJE programming software (AutoShop) simply refuses to recognize the device.
: After the main software installation, you must often install the XNet Setup (e.g., XNetSetup_en.exe ). This package frequently contains the underlying communication drivers and virtual COM port settings needed for USB connectivity. 3. Connecting the Hardware and Driver Verification Re-attempt the manual driver installation
If you downloaded a standalone ZIP file or need to locate the driver within the software directory: Locate the downloaded .zip folder. Right-click and select to unpack the files.