Press one final time to save the settings. The display will stop flashing. Setting the Alarms
Dedicated port to charge your mobile devices overnight. Auxiliary Input: 3.5mm jack for wired audio playback.
While specific button layouts vary by model, Thomson digital clock radios typically follow these standard procedures for setup: Setting the Time Ensure the unit is in Standby mode Press and hold the Time Set / Memory button until the display flashes. (or Forward/Reverse) buttons to adjust the time. again to confirm. Setting the Alarm In standby mode, press and hold the When the digits flash, use the buttons to set your wake-up time.
Open the Bluetooth settings menu on your smartphone, tablet, or computer.
This comprehensive manual provides step-by-step instructions to help you configure, operate, and troubleshoot your Thomson BTC2138. Technical Specifications thomson bluetooth digital alarm clock radio btc2138 manual
If you love falling asleep to music, press the Sleep button to set a timer. You can cycle through 90, 75, 45, 30, or 15 minutes. The unit will automatically power down once the timer ends.
The BTC2138 features , allowing two independent wake-up times (e.g., one for weekdays and one for weekends).
Check the wall outlet connection and ensure the plug is firmly seated in the back of the clock. The wire antenna is coiled or poorly positioned.
: It features a total power output of 0.35W RMS , which is adequate for bedside listening but may be perceived as "thin" by audiophiles. Press one final time to save the settings
Note: The backup batteries do not power the radio or the display during a blackout. They strictly preserve the internal clock and alarm settings so you do not have to reprogram the unit when power returns. Replace these batteries once a year. Troubleshooting Guide Potential Cause AC adapter is loose or disconnected.
(not included) to maintain time and alarm settings during power outages. Grays Auction Operational Guide (Manual Instructions)
Easily adjust the brightness of the LED screen so it doesn't keep you awake at night by tapping the Brightness button.
Tap the button until the display reads "bt" or the Bluetooth indicator light flashes rapidly. This means the device is in pairing mode. Auxiliary Input: 3
Requires 2 x AA batteries for time and alarm memory during power outages. Operating Instructions 1. Setting the Clock Time
If you need a digital copy of the manual, you can download it from the Thomson website or other online repositories.
Most user complaints about the BTC2138 originate from confusing the time-set button with the alarm-set button. Here is the precise sequence from the :