Staples - 17466 Laminator Manual

If your Staples 17466 laminator exhibits performance problems, use this troubleshooting framework to diagnose and fix the issue. The Pouch is Jammed or Wrapped Around the Rollers

A: Yes, but the manual recommends "Staples brand pouches." Generic 3 mil and 5 mil pouches work fine. However, cheap 10 mil pouches often jam because they are too thick for the 17466's roller gap.

The Staples 17466 laminator is a capable device for its intended purpose — light to moderate home and small office lamination. To get the most out of your machine: staples 17466 laminator manual

The laminator is not hot enough, or the pouch is too thick for the setting.

While the machine warms up, center your document inside a thermal laminating pouch. Leave a consistent around all edges of the paper to ensure a proper, watertight seal. Step 5: Feeding the Document The Staples 17466 laminator is a capable device

But then, something strange happened. As she was laminating the next sheet, she heard a faint whispering sound coming from the machine. It was soft at first, but grew louder and more urgent. Sarah looked down at the manual, which was still open on her desk, and noticed that the words on the page began to change.

This usually indicates insufficient heat. Ensure you have waited for the green "Ready" light and are using the correct mil setting for your pouch thickness. Leave a consistent around all edges of the

Ideal for standard documents and high-durability needs, using heat to activate pouch adhesives. Cold Mode:

Place the laminator on a flat, stable, and heat-resistant surface.