Sp Flash Tool Stuck On Download Da 100 [top] | TRUSTED – SERIES |

Once the bypass tool reports “Auth Bypass Success” , keep the device connected, open your SP Flash Tool , and hit Download immediately. 2. Match and Swap the Download Agent (DA) File

If using a desktop, use the ports directly on the motherboard (rear). 2. Update MediaTek VCOM Drivers

Once the tool says "Protection Disabled", immediately open and click Download . ⚙️ Method 4: Change Connection Settings

The agent has been successfully transferred from the PC to the phone's RAM. sp flash tool stuck on download da 100

If you are still stuck at 100% DA, you might be tempted to switch from "Download Only" to "Format All + Download." This will wipe your NVRAM/IMEI data , potentially leaving you with no cellular signal. Only use this as a last resort and ensure you have a backup of your device's original firmware.

: Bypassing MediaTek's authentication (Auth) using a modern liberation utility solves over 90% of DA freeze instances.

If you are a MediaTek (MTK) Android user trying to flash stock firmware, root your device, or unbrick a phone, you have likely encountered the . It is a powerful tool, but it is notoriously finicky. One of the most frustrating errors users encounter is the SP Flash Tool stuck on "Download DA 100%" (often represented by a yellow progress bar at 100%). Once the bypass tool reports “Auth Bypass Success”

The generic MTK_AllInOne_DA.bin bundled with standard flash tools does not support specialized or modern encrypted devices. Navigate to your downloaded stock firmware folder.

Modern MTK devices require a specialized DA or an authentication (AUTH) file to bypass secure boot protection.

Getting stuck at 100% on the red "Download DA" bar often means the tool has successfully sent the Download Agent (DA) If you are still stuck at 100% DA,

: Extract your stock firmware and SP Flash Tool to the root of your C:\ drive to avoid long file paths. Launch Utility : Open flash_tool.exe as an Administrator.

The MediaTek VCOM drivers are unstable, or the USB cable/port is dropping the connection mid-transfer.

If you're looking to create a tool or script to automate these steps or provide more feedback during the flashing process, here are some ideas:

Faulty USB cable or a weak USB port.