): Typically present in a concentration of 2.5% to 5% active chlorine. This is the primary bleaching and sanitizing agent. Sodium Hydroxide (
Immediate action required. Rinse cautiously with water for several minutes, holding eyelids open. Remove contact lenses if present and easy to do. Get immediate medical attention. safety data sheet for w5 thick bleach
According to standardized SDS classifications (such as CLP/REACH ), W5 Thick Bleach presents the following risks: Causes severe skin burns and eye damage. H290: May be corrosive to metals. ): Typically present in a concentration of 2
Causes severe skin burns and eye damage (Category 1). Rinse cautiously with water for several minutes, holding
Below is a standard 16-section SDS developed based on the typical composition of thick bleach (Sodium Hypochlorite 5–15%, Sodium Hydroxide <1%, thickener, water).
) : Present in small amounts (typically ) to maintain a high pH level. This stabilizes the sodium hypochlorite and cuts through organic grease.
Do not mix with other household chemicals (especially acids or ammonia). Do not use on sensitive metals like aluminum or copper. Section 2: Hazards Identification