Rm-0145 Manual
The RM-0145 requires standard batteries to operate. Follow these steps to prepare your device:
While the LED is still lit, enter the for your TV brand. Common codes for the RM‑0145 include:
Although packaging may vary by seller, you can typically expect:
Press and release the or Power command repeatedly. Each press sends a signal from a different internal database profile.
Once the batteries are installed, the remote is ready to be programmed. rm-0145 manual
This means the remote is in "Manual Search" or "Learning" mode. Press "SET" once to exit this mode.
Press and hold the button for about 5 seconds, until the indicator light stays on.
Press and hold the SET and POWER buttons simultaneously until the indicator light stays on.
Some "Pro" versions may include smart features that require a reset by holding the power button with a pin for 6 seconds. for a particular TV brand? The RM-0145 requires standard batteries to operate
Connects the unit to the dedicated power supply.
To prevent children or accidental button presses from resetting your programming, you can lock the remote.
Some users have reported that the RM-014S+ remote may not support all TV brands. For instance, one forum user noted that it does not work with Star Track TVs and lacks advanced features such as channel scanning, providing only basic functions like channel and volume control. If your TV does not respond to the auto search, consider purchasing a different universal remote that explicitly lists your TV model.
(If you do not have a code list, see the “Where to find the code list” section below.) Each press sends a signal from a different
Continue holding (or press "Power" again to start scanning) until the appears on your TV screen.
the "Set" button (or "Set" + "Power" depending on the specific model variation) until the indicator light illuminates.
If the remote becomes sluggish or requires you to stand very close to the TV, the first thing to check is the batteries – weak batteries are the #1 cause of reduced range.
A: Yes, via RS-485. Use a TTL-to-RS485 converter. The manual provides the Modbus register map (Holding Registers 40001-40016).
