Redsail Cutting Plotter Software Installation [LEGIT]

If you are using Artcut instead of CorelDRAW, follow these configuration steps to ensure the software sends data to the correct port. Step 1: Software Installation

Redsail plotters rely on third-party software like Artcut, CorelDRAW, or SignMaster to send vector designs to the machine. Option A: Artcut Software Installation Insert the Artcut Disk 1 into your computer.

Open Artcut. Go to the top menu and select > Link To . redsail cutting plotter software installation

Insert Graphic Disc 2 when prompted to install the font and clipart libraries. Step 2: Device Selection Launch Artcut and open a new document. Click on > Cut/Plot . In the device configuration window, click Device . Select Redsail from the manufacturer list.

With your cutting software installed, it is time to connect the plotter and install the USB driver. Use the following method for Windows, which is the most common operating system for these plotters. If you are using Artcut instead of CorelDRAW,

Before installing any files, prepare your computer and workspace.

With the USB driver installed, the final step is to configure your cutting software so it knows where to send its commands. Open Artcut

menu, ensure the COM port matches the one identified in your Device Manager. Production Manager

If you lost the CD:

The key to a perfect cut is finding the right balance between speed and pressure. The table below provides a starting point for different materials.

Note: If you see a yellow exclamation mark next to the device, the driver did not install correctly. Right-click it, select , and point the wizard directly to your driver folder. 4. Step 3: Software Configuration