Prosecure Opti Combi Manual English [480p 2027]

Remove the sensor cover by applying gentle pressure to the release tabs (usually located at the bottom or sides of the casing).

Adjust the width and depth of the active infrared detection field to cover the safe zone without interfering with the door mechanism.

Adjust the tilt screw on the AIR module to angle the safety rows (-4° to +4°).

Re-calibrate the background presence detection by tapping the programming button once, or alter the infrared angle. What is the mounting height of your sensor? prosecure opti combi manual english

The active infrared curtain protects pedestrians standing directly in the path of the closing door leaves.

The LED will turn solid green or turn off completely when the setup succeeds.

The includes a rarely-read but vital maintenance schedule. To avoid lock failure, adhere to this checklist: Remove the sensor cover by applying gentle pressure

Ensure the sensor is completely shielded from direct rain or heavy snow (use a weather cover if mounted outdoors).

The sensor detects an object in the safety curtain, or the curtain is reflecting off the door panel.

Power Input (12-24V AC / 12-30V DC). Non-polarized. The LED will turn solid green or turn

Standard 1.8 meters to 3.0 meters (5.9 ft to 9.8 ft) Supply Voltage: 12–24 V AC ±10%; 12–30 V DC ±10% Power Consumption: < 2.5 W (VA) Output Relays:

The safety curtain must drop precisely in front of the sliding door path without clipping the moving door panel itself, which would cause an endless loop of ghost openings. 5. Programming and Parameter Configuration

Securely fasten the sensor chassis to the transom using the provided mounting screws. Ensure the unit sits completely flat against the mounting surface to avoid vibrations. 3. Wiring Configurations

| Specification | Detail | | ---------------------- | ---------------------------------------------------------- | | Sensor Type | Combi sensor (radar + active infrared) | | Typical Application | Automatic sliding doors (can also be used on swing doors) | | Power Supply | 11.5 – 32 V DC (SELV) | | Outputs | Microwave (Opening) / Infrared (Safety) | | Certification | DIN 18650, EN 16005 | | Max Mounting Height | Up to 4 meters | | Operating Temperature | -20°C to +60°C | | Protection Class | IP54 (suitable for protected outdoor use with weather cap) | | Compliance | CE, UKCA, EAC, RCM, RoHS |

Wipe the plastic window with a soft, damp cloth and mild soap. Avoid harsh chemical cleaners or abrasive pads that can scratch the infrared lenses.