If the cursor does not move, press the Connect/Reset button (small pinhole button on the bottom) and then re-insert the USB receiver.
Slide off the battery cover on the bottom of the mouse. Insert the required battery (usually one AA or two AAA) according to the polarity markings (+/-). Locate the USB Receiver:
Ensure the mouse is within the 10-meter operating range and has a clear line of sight to the USB receiver. Safety and Maintenance
Turn the power switch OFF when traveling or when the device will not be used for long periods. Store the USB receiver inside the built-in slot on the bottom of the mouse so it does not get lost. If you need help with a specific issue, please tell me: pangyingo wireless mouse manual
Keep your Pangyingo mouse looking and feeling new.
A: The wireless range of the Pangyingo wireless mouse is typically up to 15 meters (49 feet).
Remove the USB receiver from the computer port, wait 10 seconds, then reinsert it firmly. Try a different USB port if the issue persists. If the cursor does not move, press the
A: That is the low battery indicator. You have approximately 2-4 hours of use remaining. Charge immediately.
Ensure the mouse power switch is in the “ON” position. For battery-powered models, verify batteries are inserted correctly with proper polarity. Replace old batteries with fresh ones. For rechargeable models, connect the mouse to a charger for at least 15 minutes.
Remove the receiver, turn the mouse off, plug the receiver back in, and turn the mouse on. Cursor Jumping or Lagging Locate the USB Receiver: Ensure the mouse is
Slide the bottom power switch to the Bluetooth (BT) icon.
Locate the battery cover on the bottom of the mouse and slide it off.
A solid indicator light will turn on during charging and shut off once the battery is fully charged. Intelligent Power Saving Mode