Msds Nalco 2000 Exclusive Jun 2026

Stop leak if safe. Dike spilled material. Absorb with inert material (sand, silica gel) and place in container for disposal. VII. Handling and Storage

Acts as a pH buffer to maintain alkaline conditions, preventing acidic corrosion.

According to Safety Data Sheets (SDS), the product is an aqueous solution containing several hazardous alkaline salts: msds nalco 2000

Do not allow the product to enter drains, surface water, or ground water. 7. Mixing and Usage Summary

Keep containers closed in a dry, cool, and well-ventilated place. Keep away from acids and reducing agents. Stop leak if safe

| | Value | | :--- | :--- | | Physical State | Liquid | | Color | Clear to hazy, deep red | | Solubility in Water | Complete, soluble in all proportions | | Specific Gravity @ 60°F (15°C) | 1.12 – 1.16 | | Density | 9.3 – 9.7 lb/gal (1.12 – 1.16 kg/L) | | pH | Approximately 9.3 – 9.7 |

The hazards described in this article are derived from multiple MSDS sources for NALCOOL™ 2000. However, hazard classifications can vary by jurisdiction. For instance, an Australian SDS may classify it as "HARMFUL, IRRITANT," while a European document describes it as "dangerous in accordance with the Preparations Directive 1999/45/EC." The table below synthesizes these descriptions into a clear summary of the key hazards. or ground water.

Disclaimer: This article is a summary based on general Nalco 2000 data. Always refer to the specific, up-to-date SDS provided by your supplier or Nalco/Ecolab for the most accurate information.

Acts as a corrosion inhibitor but is toxic if ingested.

Nalco 2000 is the coolant additive of choice for: