Mikrotik L2tp Server Setup !!link!! Full Guide

Ensure the router accepts incoming VPN traffic. Add these rules to the top of your list: UDP 500, 4500: For IPsec negotiation. UDP 1701: For the L2TP tunnel. IPsec-ESP: To allow encrypted data packets. Best Practices for 2026

This report outlines the complete configuration of a Layer 2 Tunneling Protocol (L2TP) server on a MikroTik router. L2TP is an extension of the PPP model that allows for secure remote access when combined with IPsec encryption.

Add individual credentials for each person or device connecting to the server. Go to and click + . Name: The client’s username. Password: The client’s unique password. Service: Select l2tp . Profile: Select l2tp-profile . Step 5: Configure Firewall Rules mikrotik l2tp server setup full

Create a range of IP addresses that will be assigned to VPN clients upon connection. Navigate to Add a new pool (e.g., ) and define the range, such as 192.168.89.10-192.168.89.50 MikroTik community forum 2. Configure the PPP Profile The profile defines the behavior of the connection. www.cloudhosting.lv PPP > Profiles and add a new one. Local Address:

To verify the connection, navigate to and check the Connections tab. You should see the connected client listed. Ensure the router accepts incoming VPN traffic

/ip firewall filter add chain=input protocol=udp dst-port=4500 action=accept comment="IPsec NAT-T"

L2TP without IPsec is plaintext. We will use IPsec with Pre-Shared Key (PSK) to encrypt the tunnel. IPsec-ESP: To allow encrypted data packets

/ip firewall nat add chain=srcnat src-address=192.168.100.0/24 action=masquerade comment="NAT for VPN clients"

If your router is behind a NAT (even if it’s the first router, some ISPs use CGNAT), allow: