Lovato 31 Rgam 12 User Manual !full! [ Edge ]

Includes a 3-digit reading display for alarms, status messages, and electrical readings. 🚦 Operating Modes & Interface

The controller tracks electrical and mechanical diagnostics to secure power continuity.

If the unit displays an error, refer to the "Alarms" section of the 31 RGAM 12 manual to identify the cause, often relating to incorrect sensor input or engine failure. Conclusion

For advanced setup, the unit can be connected to a PC via a serial interface (RS232/RS485). lovato 31 rgam 12 user manual

The RGAM 12 is a "set and forget" device, but the following maintenance is recommended:

Simulate a power outage by switching off the mains supply breaker. Verify that the Lovato controller starts the engine, manages the load transfer smoothly, and initiates the cooldown sequence upon power restoration.

The unit features four primary modes, selectable via front panel buttons: : The unit is deactivated; the generator cannot start. Includes a 3-digit reading display for alarms, status

Allows operators to manually start and stop the engine using the front panel push buttons. Load transfer will not occur automatically.

| Specification | Value | |---------------|-------| | Rated insulation voltage (Ui) | 690 V | | Rated impulse withstand (Uimp) | 6 kV | | Thermal current (Ith) | 12 A | | Trip class | 10 | | Ambient operating temp | -25°C to +55°C | | Storage temp | -40°C to +70°C | | Protection degree | IP20 (terminals) / IP40 (front) |

Manufacturer: Lovato Electric

Allows the operator to start and stop the generator manually using the front panel buttons. Contactor switching must be controlled manually.

Check generator output AC voltage with a multimeter. Readjust internal voltage thresholds. 8. Preventive Maintenance Schedules

The RGAM 12 is available with different contact configurations (e.g., 1-pole, 2-pole, 3-pole). The two most common versions: Conclusion For advanced setup, the unit can be