: The guide includes critical procedures for manual release in case of power failure, requiring the installer to permanently fix a descriptive label near the release key.
: Use the remote to close the door at normal speed to identify the travel limits. Atu Tech - A2T.ro Maintenance and Safety Manual Release
Check that the safety reverse mechanism functions correctly. The door must reverse upon touching a 40mm object. : The guide includes critical procedures for manual
Press MENU + POWER for 10 seconds until display flashes "RESET".
For descaling, use only Life Probo approved solution (code LBP-DS01). The door must reverse upon touching a 40mm object
: Keep the guide rails clean; use silicone spray rather than heavy grease to avoid dust buildup.
Connect a dry-contact wall button, key switch, or external intercom system. : Keep the guide rails clean; use silicone
Connect a safety edge or a NC (Normally Closed) emergency stop button. If not used, keep this terminal bridged.