Once you have the correct driver installed, the communication between the PC and the cutter is surprisingly stable. The data transmission is fast, and the machine responds instantly to commands.

Go to and bind the output to your specific COM port. Ensure the flow control is set to Hardware or Xon/Xoff . Troubleshooting Common Jinka JK 1351 Driver Issues

For users who prefer open-source software or need a modern solution on Windows 10/11, the Inkscape + PySerial combination has proven effective. This method completely bypasses traditional drivers by using Python to communicate directly with the USB ports.

Click on and select The printer that I want isn’t listed .

The Ultimate Guide to Jinka JK-1351 Driver Software: Installation, Setup, and Troubleshooting

Most Jinka JK 1351 cutters utilize one of two common USB controller chipsets: the or the FTDI chip. You must download and install these drivers to allow Windows or macOS to recognize the plotter. 1. The USB Serial Driver (CH340 / FTDI)

To help narrow down any issues you might be facing, tell me:

: Always right-click the setup.exe and select "Run as Administrator" to prevent permission-related installation failures.

Connect the USB cable from the plotter to a on your computer. Avoid USB 3.0 (blue ports) as they can cause data packet loss. Step 4: Verify the COM Port

| Feature | Specification | |---------|---------------| | Frame Material | Durable metal (steel) construction | | Drive System | Stepper motor for precise cutting | | Max Cutting Width | 1260mm to 1350mm (depending on model) | | Max Media Width | 1290mm to 1350mm | | Cutting Speed | Up to 800mm/s on advanced models | | Precision | ±0.1mm to ±0.05mm (model dependent) | | Connectivity | USB + COM + Flashdisk | | Certification | CE Certified |

Wait for Windows to attempt a "Plug and Play" discovery (it will likely fail, which is why we need the manual driver). 3. Run the Installer Open the downloaded driver file. Click .

This is a classic sign of a baud rate mismatch or incorrect driver language. Ensure your software communication speed is set strictly to 9600. Additionally, verify that the software is sending commands in HPGL or DMPL format, depending on what your specific Jinka firmware requires. 3. Port Already in Use Error