Pro tip: If you have the newer “Programat P95 CS2” (Ceramics Software 2), ensure you download the CS2-specific manual, as the interface differs from legacy models.
Ensure the voltage matches the specifications on the rating plate (usually 110-120V or 230V).
The vacuum pump must be installed in a well-ventilated area to ensure consistent performance. Key Technical Features Precise Control:
A standard porcelain firing profile on the P95 is broken down into distinct stages. When editing a program, you will cycle through these parameters sequentially: Standby Temperature ( Ivoclar Programat P95 Manual
The manual emphasizes that incorrect vacuum settings are the number one cause of porosity in pressed ceramics.
The peak firing temperature for the specific porcelain matrix.
Connect your dental vacuum pump to the dedicated outlet at the rear of the furnace. Secure the vacuum hose tightly with hose clamps to prevent pressure drops. Pro tip: If you have the newer “Programat
Ivoclar Programat P95 is a high-tech, fully automatic ceramic vacuum furnace designed for dental technology. It is a successor to the Programat P90, featuring improved temperature sensing and microprocessor control. Technical Specifications
| Error Code | Description | Manual Solution | | :--- | :--- | :--- | | | Thermocouple failure (open circuit) | Power off. Check wiring to thermocouple. Replace if resistance is infinite. | | E-05 | Temperature ramp too slow | Heating elements aged. Replace elements. Check voltage supply. | | E-12 | Vacuum not reaching setpoint | Check door seal for debris. Replace vacuum pump oil (if external pump). | | E-18 | Muffle lift motor stalled | Ensure no obstruction. Lubricate lift spindle with high-temperature grease. |
No. The P95 has a unique heating element geometry and software logic. Using a P90 manual will lead to programming errors. Always use the P95-specific manual . Key Technical Features Precise Control: A standard porcelain
If you have a — like “What’s the correct pressing temperature for IPS e.max with a large ring?” or “How to fix error E-18?” — let me know and I can give you the relevant excerpt or explanation.
Press the key for the parameter you wish to change (e.g., Temperature). Use the "+" or "-" keys to adjust the value.
Do not touch hot parts during or immediately after operation to avoid burns.
Clean the furnace with a dry or slightly moist cloth. Avoid using solvents. 2. Initial Start-Up and Installation
Step-by-step from the manual: