Yes and no. was the original name for the programming software of the F5020/F6020 series. Icom later renamed it to CS‑F5010 to consolidate the product line. Both names refer to the same software core. Some vendors still sell it under the old name.
This comprehensive guide covers everything you need to find, install, and use the programming software for the Icom IC-F5023H. 1. Finding the Correct Software Link
The IC-F5023H features an RJ-45 microphone jack on the front panel, which doubles as the programming interface. You will need:
Ultimate Guide to Icom IC-F5023H Programming Software The Icom IC-F5023H is a rugged, reliable mobile two-way radio widely used in commercial, public safety, and transport fleets. To configure channels, frequencies, signaling, and advanced features, you need the correct programming software and hardware setup. icom icf5023h programming software link
2. Where to Find the Icom IC-F5023H Programming Software Link
Icom does not typically provide free public download links for commercial software on their main consumer websites. Software must be purchased or requested through an authorized Icom dealer or the official Icom America / Icom Global Dealer Portal.
Open the to verify the cable assignment. Look under the Ports (COM & LPT) section to identify which COM port number has been assigned (e.g., COM3). Open your installed CS-F3020 programming suite. Yes and no
It allows users to read the radio's current configuration, edit channel aliases, change frequencies, set up CTCSS/DTCS tones, and write the updated settings back to the transceiver. How to Obtain the Software Link
Once you have successfully downloaded the software via your link and secured the OPC-1122U cable, follow these steps to read and write to your radio: Step 1: Install the USB Drivers
Because Icom software is proprietary intellectual property, downloading it from unauthorized third-party blogs or forums can expose your computer to malware or corrupt your radio's firmware. To obtain the software safely and legally: Both names refer to the same software core
Check your Windows Device Manager to ensure the USB cable driver is installed correctly.
Match the software COM port number with the port assigned to your cable in the Windows Device Manager (e.g., COM3). Step 4: Read the Existing Radio Data
Choose the correct noted earlier from Device Manager.
Are you programming for frequencies or amateur/ham radio ?