I !new! Download Fixed Driver Cutting Plotter Jinka 1351

If using , you may need to copy the Jinka driver files ( .gov or .plt configurations) into the Artcut DRV folder. 3. Step-by-Step Installation Guide Follow these steps to install the driver cleanly:

| ✓ | Check | |---|-------| | □ | Plotter is powered on before connecting to computer | | □ | USB or Serial cable is properly connected to both devices | | □ | Driver is installed (check Device Manager for confirmation) | | □ | COM port settings match between plotter and software (9600 baud) | | □ | Cutting software output port is correctly configured | | □ | Design files are vector (not bitmap) format | | □ | Antivirus software has been updated and run |

Don't throw your Jinka 1351 in the trash. The hardware is fine—the software is just stupid. Once you force-feed Windows the correct generic USB driver, this plotter is a beast.

Ensure the driver is properly installed and compatible with your operating system i download fixed driver cutting plotter jinka 1351

If you've lost or damaged your original driver CD, you have several options:

Ensure the following values match in both Windows and your cutting software (like CorelDraw or Flexi): Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None. LINK DOWNLOAD • Welcome to JINKA Indonesia

This comprehensive guide will help you find the correct driver, install it safely, and fix common connection issues so you can get back to cutting vinyl. 1. Understand Your Jinka 1351 Connection Type If using , you may need to copy the Jinka driver files (

Open your cutting software (e.g., , ArtCut , FlexiSign , or the CorelDraw Cutting Plug-in ). Navigate to the Connection/Port Settings menu.

Plug the Jinka 1351 USB cable back into a (the black ports, rather than the blue USB 3.0 ports, as they offer better stability for older hardware). Step 4: Configure Your COM Port Settings

I can provide the exact configuration steps or alternative download paths for your setup. Share public link The hardware is fine—the software is just stupid

Why change the port? Many cutting software applications (like ArtCut or SignTools) default to COM1 or COM2. Changing your USB port to match these defaults eliminates the need to reconfigure your software's port settings.

If your computer shows a yellow triangle or "Code 10" error, the modern Windows-provided driver is blocking your plotter. You need the older, stable 2008 version of the driver which handles the communication chip perfectly.

If the basic driver does not work, these professional software packages include "fixed" internal drivers for Jinka models: SignMaster / AnyCut:

Match the Port number exactly to what you saw in Device Manager (e.g., COM3).