| Author |
 Topic Search  Topic Options
|
tthorsten 
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
 Post Options
 Thanks(0)
 Quote  Reply
 Posted: 22 March 2017 at 8:17pm |
Most current version: 1.70.18
- Changed selection of trace for calculation
- Time recall added
- New: You can show a stored trace as main trace and use it for the calculation
- Delay – Suggestion tool corrects different delay settings of the measurement
- Some fixes
Edited by tthorsten - 22 March 2017 at 8:24pm
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
 |
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 April 2017 at 9:29am |
update
Hytera Usb Driver Jun 2026
If you are configuring Hytera TETRA terminals (like the PT580H), you will require a distinct driver set built specifically for TETRA firmware environments. Step-by-Step Installation Guide
: Connect your radio using a compatible cable (e.g., PC63 or PC37 ). Your system should automatically recognize the hardware and assign it a COM port.
Windows 11 has stricter security policies for drivers, which can cause problems with software designed for older systems. The most common issue reported by users is the computer not recognizing the Hytera radio, showing an or a yellow exclamation mark in Device Manager. hytera usb driver
Avoid plugging programming cables into unpowered USB hubs or keyboard passthrough ports, as they may not supply enough current to maintain a stable connection during a firmware write cycle.
Modern Hytera DMR radios (such as the PD782, HP782, or HM782 series) establish a local area network connection over USB. The radio assigns itself a virtual IP address (typically 192.168.10.1 or 192.168.10.2 ), and the CPS communicates with the device via standard network protocols. If you are configuring Hytera TETRA terminals (like
– If the global site is inaccessible, contact your regional dealer.
By following this guide, you'll be able to successfully install, troubleshoot, and update the Hytera USB driver, ensuring seamless communication between your Hytera device and computer. Windows 11 has stricter security policies for drivers,
Without the correct driver, your PC will not recognize the radio—even if the CPS software is installed.
This is the universal legacy package used for the standard DMR lineup, including the PD500, PD600, and PD700 series portables, as well as MD600 and MD700 series mobile radios.
If you are using a newer firmware version on your radio, an outdated USB driver might fail to bridge the connection. Always update your driver package alongside your CPS software upgrades. Fix 4: Check the Radio Mode
Ultimate Guide to Hytera USB Drivers: Installation, Troubleshooting, and Firmware Updates Noboy is perfect. Sorry to say, but software without errors is an illusion. This also applies to SATlive. No Errors. I assume that this will not hold even for the new version. But all bugs reported so far had been fixed. Make it pefect. Each report about a problem, an error or even suggestions help us to improve SATlive.
Thanks for it. Get it. |
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 March 2018 at 6:53pm |
update new version www.satlive.audio
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
toastyghost
The 10,000 Points Club
Joined: 09 January 2007
Location: Manchester
Status: Offline
Points: 10932
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 March 2018 at 9:39am |
|
I think perhaps the complete lack of replies from anybody other than yourself suggests that any interested users can get this info elsewhere, perhaps from the mailing list SATLIVE would build up from their actual sales?
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 31 July 2018 at 1:00pm |
|
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 August 2018 at 10:39am |
update www.satlive.audio https://www.satlive.audio/en/portfolio/download/Most current version: 1.70.30 Some graphical rework Added ‘weighting affects Color’ Multi traces support in room acoustic tools Added ‘Block Screensaver’ option Internal fixes and improvements Please note: If you’ve downloaded SATlive 1-70-30 before August, 8th, please perform the update. The initial release contains two errors which have been fixed for this release (the current release’s version is 1.70.30.4 ). For the complete download click here. Load down the manual only. Language files for other countries.
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 November 2018 at 2:59pm |
new Version and timealigment handbook out now www.satlive.audio - have fun
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 November 2018 at 3:36pm |
|
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 July 2019 at 12:58pm |
new Version out and there is a new article series online Fridays for Features - more Measurment related and very informative https://www.satlive.audio/en/fridays-for-features/
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 October 2019 at 11:06am |
|
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 February 2020 at 9:12am |
If you are configuring Hytera TETRA terminals (like the PT580H), you will require a distinct driver set built specifically for TETRA firmware environments. Step-by-Step Installation Guide
: Connect your radio using a compatible cable (e.g., PC63 or PC37 ). Your system should automatically recognize the hardware and assign it a COM port.
Windows 11 has stricter security policies for drivers, which can cause problems with software designed for older systems. The most common issue reported by users is the computer not recognizing the Hytera radio, showing an or a yellow exclamation mark in Device Manager.
Avoid plugging programming cables into unpowered USB hubs or keyboard passthrough ports, as they may not supply enough current to maintain a stable connection during a firmware write cycle.
Modern Hytera DMR radios (such as the PD782, HP782, or HM782 series) establish a local area network connection over USB. The radio assigns itself a virtual IP address (typically 192.168.10.1 or 192.168.10.2 ), and the CPS communicates with the device via standard network protocols.
– If the global site is inaccessible, contact your regional dealer.
By following this guide, you'll be able to successfully install, troubleshoot, and update the Hytera USB driver, ensuring seamless communication between your Hytera device and computer.
Without the correct driver, your PC will not recognize the radio—even if the CPS software is installed.
This is the universal legacy package used for the standard DMR lineup, including the PD500, PD600, and PD700 series portables, as well as MD600 and MD700 series mobile radios.
If you are using a newer firmware version on your radio, an outdated USB driver might fail to bridge the connection. Always update your driver package alongside your CPS software upgrades. Fix 4: Check the Radio Mode
Ultimate Guide to Hytera USB Drivers: Installation, Troubleshooting, and Firmware Updates |
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
tthorsten
Registered User
Joined: 22 April 2004
Location: Germany
Status: Offline
Points: 134
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 April 2020 at 5:39pm |
NEW VERSION with Virtual processor out now www.satlive.audio - see english page
|
|
www.tb-audio.de
LEVELchek www.levelcheck.de
SPL tracking
SATlive www.satlive.audio
best Measurementsoftware for Live People
DBlimits
www.dblimits.com
Isemcon EMX7510 measurment Microphon
|
|
