2022 - Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server

Search for your specific server model (e.g., HPE ProLiant DL360 Gen10 or ML350 Gen10 ).

: Manages up to 14 physical drives and up to 14 logical drives.

Ensure the latest driver is installed. The S100i is not intended for intensive, high-I/O applications. Conclusion

: The driver is not included in standard Windows Server media. It must be manually injected during OS installation via USB or automatically added using HPE Intelligent Provisioning . Search for your specific server model (e

Despite careful installation, you may encounter problems. Here are the most frequent S100i driver issues on Windows Server 2022, with solutions.

The S100i exclusively supports SATA drives (up to 14 drives, depending on the server configuration). It does not support SAS drives without a hardware controller upgrade.

Navigate sequentially: System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options > Embedded SATA Configuration . Change the active selection to . The S100i is not intended for intensive, high-I/O

For enterprise fleets, download the . Run HPE SUM within Windows Server 2022 to automatically inventory, flag, and update the S100i storage driver alongside the system firmware. Troubleshooting Common Issues 1. "No Devices Found" Even After Loading Driver

: Full support for Microsoft Windows Server 2016, 2019, and 2022 . Driver Download for Windows Server 2022

The Intelligent Provisioning system automatically mounts a virtual deployment drive containing all required hardware drivers, including the S100i storage stack, and hands control over to the Windows installer seamlessly. Installing Management Utility Suites Despite careful installation, you may encounter problems

After install:

Manages up to 14 SATA drives connected to the system board's embedded SATA ports.