This issue has been widely reported. For Windows 11, users must before the drivers can be installed. Fortunately, once the driver is in place, the device runs reliably on Windows 11.
The Hantek 6022BL is a highly popular, budget-friendly 20MHz PC-based USB oscilloscope and logic analyzer. While it offers incredible value for hobbyists and engineers, getting its drivers and software to run smoothly on Windows 11 can sometimes be a challenge due to updated OS security protocols.
Choose the driver (the open-source firmware used for Cypress FX2 chips).
You have several software options for controlling your Hantek 6022BL on Windows 11. Your choice will depend on your specific needs. hantek 6022bl windows 11
As documented on the Sigrok wiki, only the logic analyzer portion is fully supported; the oscilloscope functionality is still a work in progress.
: Use the provided USB cable. Note that it may require two USB ports on your PC—one for data and an extra for power—since the device lacks an internal battery. Recommended Software Alternatives
: Attach the included probes to the BNC connectors. The probes are switchable between 1X and 10X attenuation. This issue has been widely reported
Go to sigrok.org/wiki/Downloads and download the latest PulseView installer for Windows. Run the installer and follow the prompts.
is a 20MHz bandwidth, 48MSa/s sample rate USB oscilloscope. Its standout feature compared to the 6022BE is the integrated , though keep in mind it cannot run the oscilloscope and logic analyzer modes simultaneously. Step 1: Driver Installation (The Tricky Part)
One critical piece of advice from experienced users: if the initial driver installation fails, you must thoroughly clean your system of all driver and software remnants before attempting a fresh installation. Otherwise, the Hantek may become unresponsive or fail to communicate with the PC. The Hantek 6022BL is a highly popular, budget-friendly
To use the logic analyzer on Windows 11, the gold standard is by the sigrok project. Step 1: Install PulseView
needs a stable 5V supply. Use USB ports on the back of your desktop PC, not a cheap USB hub.