Check the physical cable connections. Go to Printer Properties > Ports tab and verify that the checked port matches how the printer is plugged in. If using a USB cable, try moving the checkmark from USB001 to USB002 or USB003 . Symptom: Print jobs get stuck in the print queue Cause: The Windows Print Spooler service has stalled. Solution:
Problem 2: Garbage characters, symbols, or endless blank paper printing
Open your web browser and go to http://localhost:631 to access the CUPS interface. Navigate to . gp l80180 driver
A: Absolutely. You must use a level shifter (3.3V to 5V) on the step/direction pins. The L80180’s opto-isolator requires at least 5mA; the Pi’s 3.3V GPIO cannot reliably trigger it without a buffer.
: Set the default paper size to 80mm x Receipt or 80 x 297mm to prevent layout clipping. Check the physical cable connections
This is often a driver setting rather than a mechanical fail. Go to and look for the "Paper Conservation" or "Layout" tab. Ensure the "Cut Paper" option is checked for "End of Document." Maintenance Tips
4. Windows 11 Driver Signature Enforcement Blocking Installation Symptom: Print jobs get stuck in the print
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Drivers-Thermal Printers,Receipt Printer,Barcode ... - Gprinter
The GP-L80180 is designed for durability and efficiency in fast-paced environments.