The Canon Service Tool is an official, proprietary software utility used by Canon technicians to calibrate, test, and reset hardware configurations on Pixma and Maxify printers.
Under "Ink Absorber Counter," click again (optional, for safety).
Press the button on the printer to turn it off completely. (If it does not turn off after one press, press it again or wait 30 seconds before unplugging the power cord). Wait 10 seconds, then turn the printer back on normally.
Follow these steps exactly. If you miss a step, turn the printer off and start over. free resetter canon service tool v320032 fixed
The tool does not support this specific printer model function.
To successfully use the tool, your printer be in "Service Mode". Enter Service Mode : Turn off the printer but keep it plugged in.
Under the "Main" tab, find the or Absorber section. The Canon Service Tool is an official, proprietary
The is a Windows-based utility used primarily for maintenance tasks on Canon Pixma printers, such as resetting the waste ink absorber counter (Error 5B00). While the tool is widely discussed in user forums, it is important to note that it is not officially distributed to the public by Canon, as they generally recommend that ink absorber services be performed by authorized service agents. Key Features of v3200
Before downloading, ensure your printer is on this list. The v320032 fixed version works best with:
Canon printers have a that tracks how much ink is absorbed by the internal pad. When full, the printer locks and shows an error (often 5B00 or related codes). The official solution is to replace the waste ink pad or take the printer to a service center. (If it does not turn off after one
If you have found a copy of the Service Tool and are determined to proceed, follow these best practices:
The tool acts as a bridge to the printer's , allowing users to clear internal counters and adjust region settings. Its primary use cases include:
These tools do not work on a printer that is simply turned on. The printer must be placed in Service Mode manually. This usually involves a specific sequence of button presses (holding the Resume button while pressing Power, etc.). If this sequence is not performed correctly, the Service Tool will not detect the printer, regardless of whether you have the "fixed" version or not.