Visit the official HP/Samsung Support Page (HP now handles Samsung printer support). Search for .
If you are searching for a on the internet, you need to exercise extreme caution.
Press and hold the Start button for 4 seconds. The printer will print another configuration page with all current settings.
Hold the PRINT SCREEN / WPS button (above the power button) for about 10 seconds until the LED flashes once. firmware reset samsung m2020w free
Samsung Xpress M2020W Firmware Reset Guide Samsung Xpress SL-M2020W laser printers use toner cartridges equipped with smart chips. These chips count the number of printed pages and lock the printer when they reach a specific limit. This happens even if there is still toner powder left inside the cartridge.
In rare cases, the button sequence may fail. Do not panic. Try these free fixes before assuming hardware failure.
Q: Can I perform a firmware reset on my Samsung M2020W printer without a computer? A: Yes, you can perform a firmware reset on your Samsung M2020W printer using the built-in reset feature, which does not require a computer. Visit the official HP/Samsung Support Page (HP now
When searching online, you might see other terms. Here’s what they mean for the Samsung M2020W:
: Turn on the printer and hold the Stop/Cancel button for approximately 10–15 seconds . Release the button once the LEDs start flashing, then restart the device to complete the reset.
The printer will print a . Look for the line labeled Firmware Version or Main Firmware Version to find your exact software build. Conclusion Press and hold the Start button for 4 seconds
Reset: Turn on the device → Menu → System → Factory Settings. Alternatively, hold the Stop button for 15 seconds. Farbtoner.com GmbH Samsung Xpress SL M2020 M2023 M2024 M2026 M2027 M2029
Hold the same button for about 15 seconds until the LED stays green.
Before proceeding, note that resetting the firmware will erase all customized settings. Ensure you have a record of these settings if you need to set them up again.