Erhardt-leimer Do 3001 Manual «99% Certified»

The manual warns that changing P-10 while the line is running will cause a violent web shift. Always set the controller to "Manual" before parameter changes.

Verify that the HMI or status LEDs on the DO 3001 illuminate without error codes. Set the system to via the control interface. Step 2: Actuator Direction Check

For specific configuration details, parameter lists, or advanced troubleshooting procedures, please refer to the official manual obtained from Erhardt+Leimer.

Proper physical alignment is the foundation of accurate sensor performance. Follow these steps to mount the DO 3001 correctly: Mounting Distance (Focal Length) Erhardt-leimer Do 3001 Manual

Are you looking to resolve a ? Share public link

The Do 3001 simplified visual diagnostics. A prominent LED (usually green or red, depending on the revision) signals the status.

Many converting machines (e.g., Goebel, Atlas, Kampf) were built with the DO 3001 as OEM equipment. Check the original "Machine Builder Manual" often found in the electrical cabinet. These manuals contain the E+L section. The manual warns that changing P-10 while the

Founded in 1919, Erhardt+Leimer (E+L) is a world leader in web guiding, web tension control, and web inspection systems. The company serves industries such as textile, paper, film, foil, tire, non‑woven, and printing. The is a key component of E+L’s web guiding automation, designed to provide an intuitive touch interface for operators while serving as the central data hub for the entire control loop.

[ Upper Sensor Head ] ---------------------------------- <-- Light Path ====== Material Web ====== <-- Pass-line (Centered vertically) ---------------------------------- <-- Light Path [ Lower Sensor Head ] Installation Steps

To achieve smooth web guiding without oscillation, the control loops must be tuned to match the line speed and material elasticity. Proportional Gain ( Kpcap K sub p Set the system to via the control interface

Adjusting Proportional (P), Integral (I), and Derivative (D) parameters to eliminate system oscillation or lag.

To help provide the most accurate assistance for your specific setup, could you share a few more details?