Disco 240 Dmx Controller Manual Jun 2026

Before turning on the controller, you must physically connect and address your lighting fixtures. Physical Connections

I can provide tailored instructions for your exact lighting rig. Share public link

Press and hold the button, then press the Music/Bank Copy button. The controller will flash, confirming the bank is cleared. Factory Hard Reset (Clear All Data) Turn off the controller's power switch.

Use the buttons to choose a destination bank (01 to 60).

stands out for its flexibility in handling complex lighting rigs: How to programe on DMX 240 disco 240 dmx controller manual

Manufacturers often sell this board under various names including "Disco 240," "HD-DMX512-DISCO240," "KLC Disco 240," or simply "240灯控台" (Chinese for "240 Light Console"). While the brand names change, the operational logic remains largely identical.

: Select your desired bank using the Bank Up/Down buttons, then manually press Scene buttons 1–8 to change your room aesthetic instantly. Auto Mode (Speed & Fade Controlled)

The Disco 240 DMX controller is a staple in the entertainment lighting industry. It provides mobile DJs, event production crews, and small venue owners with reliable control over intelligent lighting fixtures. This comprehensive guide serves as your complete operational manual. It covers everything from basic hardware configuration to advanced scene programming. Hardware Overview and Front Panel Layout

is a professional console capable of controlling up to 12 fixtures with 20 channels each, totaling 240 channels. It is designed for managing complex lighting setups like moving heads (scanners), par cans, and effects. Channels: 240 DMX channels total. Fixture Control: Supports up to 12 scanners (fixtures). Before turning on the controller, you must physically

Now that the hardware is set up, let us program a simple chase.

are you connecting to the controller?

Check that the fixture's dip switches match our addressing table. Press the Page Select button to check higher channels. Fixtures flicker or stutter during playback. Missing termination or faulty DMX cabling.

| Fader | Channel | Typical Function | |-------|---------|------------------| | 1 | 1 | Pan | | 2 | 2 | Pan Fine | | 3 | 3 | Tilt | | 4 | 4 | Tilt Fine | | 5 | 5 | Speed (Pan/Tilt) | | 6 | 6 | Dimmer | | 7 | 7 | Shutter/Strobe | | 8 | 8 | Color Wheel | | 9 | 9 | Gobo Wheel | | 10 | 10 | Gobo Rotation | | 11 | 11 | Prism | | 12 | 12 | Focus | | 13 | 13 | Zoom | | 14 | 14 | Frost/Effect | | 15 | 15 | Program Speed | | 16 | 16 | Reset/Control | The controller will flash, confirming the bank is cleared

Hold the button and tap the SCENE button (1-16) that corresponds to the DMX channel on the fixture.

Adjust the to control how quickly the steps change.

These buttons store and trigger individual lighting looks (scenes) within a selected bank.

Chases are sequences of scenes played back-to-back to create motion and dynamic light shows. You can program up to 6 independent chases. Control Sliders (Speed & Fade Time)

These physical sliders adjust the DMX values (0–255) for the selected fixture.