Remedy: Inspect and tighten all suction-side fittings and hose clamps.
Connect the ChipBLASTER interface cable to the CNC machine’s M-code relay outputs. This allows the CNC control to command high-pressure activation through standard programming codes (e.g., M21/M22 depending on the machine builder). Plumbing Hookups
Worn pump valves or broken internal springs. chipblaster jv10 manual
Mounting: Securely mount the JV10 unit to the CNC machine or a dedicated stand using the provided mounting hardware.
Position the JV10 on a flat, level surface as close to the CNC machine's coolant tank as possible to minimize suction line length. Remedy: Inspect and tighten all suction-side fittings and
Do not stand on motors, supports, or junction boxes during maintenance. Maintenance:
1. Inspect and tighten all suction fittings.2. Inspect pump chambers for internal wear.3. Verify 3-phase phasing matches the rotation arrow. Plumbing Hookups Worn pump valves or broken internal
Congratulations on purchasing the Chipblaster JV10, a high-performance CNC milling machine designed for precision machining. This manual provides a detailed guide on how to operate, maintain, and troubleshoot your Chipblaster JV10.
Refill CNC coolant tank; check intake hose for kinks; add anti-foaming agent. 6. Safety Guidelines service the unit while it is running or pressurized.
Lift the spring-loaded cap and inspect the sealing O-ring for tearing or degradation.