Canon Service Tool V5610 Install -

Download the tool from a reputable technician blog or printer repair archive. Ensure your anti-virus software scans the file.

To reset the ink counter, find the section, ensure "Main" is selected, and click "Set" .

Click in the top left corner to print or save a diagnostic log confirming the counter has reverted to 0%. Step 4: Exit Service Mode Close the Service Tool v5610 application on your PC. Press the Power button on the printer once to turn it off. canon service tool v5610 install

Click the button located directly to the right of that dropdown.

Once your printer is in Service Mode, double-click the ST5610.exe file to launch the tool. The main interface will appear, and the "Printer Model" dropdown menu should automatically detect your connected printer. If it does not, double-check that your printer is in Service Mode and the USB cable is securely connected. Download the tool from a reputable technician blog

Resets the main and platen waste ink absorber counters back to 0%.

Before beginning the installation, ensure you have the following: Click in the top left corner to print

Press the button 5 times (for most models like G-series) or 6 times (for some G2010 models). Release the Power button.

Proper preparation is key to a successful installation. Before you download the tool, you must complete several critical steps.

Executes deep nozzle checks and alignment patterns directly via firmware commands.