Audinate - Dante Virtual Sound Card - Dvs-4.4.1.3 Standalone

The Dante Virtual Soundcard (v4.4.1.3) includes several functional highlights:

Engineers can connect a laptop to a Dante network at a venue, recording 64 channels of high-resolution audio via a DAW, while simultaneously sending backing tracks back to the console.

is a dedicated audio interface driver . It takes exclusive, low-latency control of audio I/O between a DAW and the Dante network. It is ideal for professional recording, playback, and any task where high channel counts and low latency are critical.

Before installation, disable Wi-Fi and any VPNs. Also, turn off Windows Firewall or macOS’s built-in firewall temporarily. DVS requires raw access to the network stack. After installation, you can re-enable firewalls with specific exceptions for DanteDiscover.exe and DVS.exe . Audinate - Dante Virtual Sound Card - DVS-4.4.1.3 STANDALONE

| Sample Rate | Maximum Bidirectional Channels (Tx/Rx) | | :--- | :--- | | 44.1 kHz / 48 kHz | 64 x 64 | | 88.2 kHz / 96 kHz | 32 x 32 | | 176.4 kHz / 192 kHz | 8 x 8 |

This article is for informational purposes. Audinate, Dante, and Dante Virtual Sound Card are trademarks of Audinate Pty Ltd. Always refer to the official user manual for the latest safety and operational guidelines.

Live sound engineers can use DVS-4.4.1.3 to feed multi-track audio from a DAW back into a Dante-enabled mixing console, enabling precise virtual soundchecks without the band present. 4. System Requirements DVS-4.4.1.3 is highly compatible: The Dante Virtual Soundcard (v4

by Audinate is a software application that turns a standard computer into a Dante™-enabled device, transmitting and receiving up to 64x64 channels of high-quality, low-latency audio over a standard IP network. Version 4.4.1.3 (Standalone) is a specific maintenance release focused on stability, driver signing compliance (Windows/macOS), and compatibility with modern operating systems. The "Standalone" designation typically implies the full installer (not a network deployable MSI), intended for manual installation on a single workstation.

In the modern world of audio production, the migration from analog snakes and point-to-point digital connections to networked audio has been nothing short of revolutionary. At the heart of this revolution is , the company behind the Dante Audio-over-IP (AoIP) protocol. While hardware interfaces and stage boxes are common talking points, the true bridge between your computer and the Dante network often comes in the form of software. That software is the Dante Virtual Sound Card (DVS) .

The keyword specifies . This is not just arbitrary version numbering. Version 4.4.1.3 represents a mature, stable build that corrected several bugs from earlier 4.4.x releases. Users reported that this version offered improved clock stability on Windows and reduced CPU spikes on macOS. It is ideal for professional recording, playback, and

This means any audio application that works with a sound card can instead send and receive audio over the network. You can record a 64-track live show directly into your Digital Audio Workstation (DAW) like Pro Tools or Logic Pro, play back multi-channel audio for a theater production, or route Zoom audio to a broadcast mixer—all with a single Ethernet cable. It operates quietly in the background, acting as a virtual bridge between your computer and other Dante-enabled gear.

: DVS v4.4.1.3 is fully supported on Windows 11 and Windows 10 (64-bit) and modern versions of macOS (64-bit).

: DVS cannot act as a "Leader Clock" on a Dante network; it requires at least one hardware Dante device (like a mixer or preamp) or a computer running to provide the master clock. Wired Only