Portable - Airap2800k9me851820tar

IEEE 802.11ac Wave 2 (4x4 MU-MIMO with three spatial streams).

This is the critical step. At the AP CLI, enter the following command:

It brings the same security and SSID policies used in the main office to a remote or temporary site. 4. Configuration and Deployment airap2800k9me851820tar portable

: The "Flexible Radio Assignment" allows the unit to automatically run both radios in 5-GHz mode if the 2.4-GHz band is congested.

If the device needs to be restored to factory defaults before or after using this firmware: IEEE 802

Cisco Aironet 2800 Series Access Points, Getting Started Guide

Install an application like Tftpd64 on your technician laptop. Marketing tagline Portable power

Marketing tagline Portable power. Enduring battery. Built to move.

Connect a console cable to the AP's RJ-45 console port and launch a terminal tool like PuTTY. Connect the AP’s primary Ethernet port to a local network switch alongside a local TFTP or SFTP server hosting the downloaded AIR-AP2800-K9-ME-8-5-182-0.tar file. 2. Executing the CLI Upgrade Command

The compressed tape archive file format containing both the operational AP image and the controller code required to boot the virtual management interface. Technical Specifications & Capabilities