Lay the PC face-down on a soft, clean surface like a microfiber towel or foam pad to protect the screen screen from scratches. Step 1: Removing the Stand
Gather the following before you begin:
The thermal module (heat sink and heat pipe assembly) sits directly on the CPU:
: Once the shield is off, the CR2032 battery is accessible for replacement if the system is losing time or BIOS settings. Quick Tips for Reassembly Cable Management acer aspire zc610 disassembly full
Pull the memory module straight out of the slot by its edges. Repeat for a second stick if present. Step 6: Removing the Cooling Fan and Heatsink Assembly
Before putting all the screws back, it's a good idea to reconnect power briefly to test if the system boots and all components are recognized. If it works, finish the reassembly and enjoy your refreshed Acer Aspire ZC-610.
Most core components are hidden under a secondary metal EMI shield. Lay the PC face-down on a soft, clean
Remove the mounting screws that secure the hard drive caddy to the computer frame.
Reassemble the unit in the reverse order of the steps above.
: An anti-static wristband is recommended when handling internal components. Repeat for a second stick if present
Over time, dust builds up in the heatsink fins, causing the system to run loud and hot. Cleaning or replacing the thermal paste requires removing this unit.
To remove the heatsink, loosen the screws holding the copper cooling block over the processor. Loosen them in a diagonal pattern (e.g., screw 1, then screw 3, then screw 2, then screw 4) to prevent uneven pressure on the CPU die.